Product Information

The Placard 1 is the base for all other accessories and add-ons. Big enough to fit three AR15-style magazines. Built with modularity in mind. It is compatible with most swift clip-style hangers for placards on plate carriers. While this is primarily built to be used as a placard, it is compatible with most shoulder harnesses on the market. The Placard 1 gives you the ability to quickly adapt your kit to the needs of your mission.

Minimal Placard

Made to fit 3 5.56mm magazines, and other accessories and additions.

Materials

All materials used are Berry-compliant. The main body of the placard is made from B52 laser cut material, ITW 1-inch hardware, and mil-spec VELCRO® Brand hook, loop, and ONE-WRAP®.

Feature Set

The vertical straps of the Placard 1 are made using ONE-WRAP®. This allows the user to adjust the ride height whether it is being used as a chest rig or as a placard on a plate carrier. The horizontal buckle mounting location is inset from the outer edges. This allows the material to hide away behind the placard if buckles are not being used. The Placard 1 will accept any magazine retention or other pouches and accessories that are hook-backed. The entire inside is lined with loop. The front of the placard has a loop field for patches or other accessories, and the back is hooked-lined to attach to a plate carrier. The Placard 1 has 3 pairs of holes at the top. On each side of the Placard 1 there are 4 rows of molle and 2 pair of holes at the top and bottom. On the bottom of the Placard 1 there are 4 pair of holes, and 2 sets of molle. Each hole is sized so that the user can add bungee or 550 cord to tie down extra equipment like TQ's. The molle slits can be used for attaching other pouches wire management or tie down points.